<5>Linux version 2.6.16.13 (dion@debian) (gcc version 4.1.1) #4 Sat Mar 10 00:28:37 EET 2007 <4>CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE) <4>Machine: Motorola Ezx Platform <4>Memory policy: ECC disabled, Data cache writeback <7>On node 0 totalpages: 12288 <7> DMA zone: 12288 pages, LIFO batch:3 <7> DMA32 zone: 0 pages, LIFO batch:0 <7> Normal zone: 0 pages, LIFO batch:0 <7> HighMem zone: 0 pages, LIFO batch:0 <6>Run Mode clock: 195.00MHz (*15) <6>Turbo Mode clock: 292.50MHz (*1.5, active) <6>Memory clock: 195.00MHz (/2) <6>System bus clock: 195.00MHz <4>CPU0: D VIVT undefined 5 cache <4>CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets <4>CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets <4>Built 1 zonelists <5>Kernel command line: console=ttyS2,115200n8 console=tty1 noinitrd root=/dev/mmcblk0p2 rootfstype=ext3 rootdelay=5 ip=192.168.1.2:192.168.1.1:192.168.1.1:255.255.255.0:ezx:usb0:off debug mem=32M@0xA0000000 mem=16M@0xAC000000 <4>PID hash table entries: 256 (order: 8, 4096 bytes) <4>Console: colour dummy device 30x80 <4>Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) <4>Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) <6>Memory: 32MB 16MB = 48MB total <5>Memory: 46120KB available (1936K code, 448K data, 92K init) <7>Calibrating delay loop... 291.63 BogoMIPS (lpj=1458176) <4>Mount-cache hash table entries: 512 <6>CPU: Testing write buffer coherency: ok <6>NET: Registered protocol family 16 <3>write 0x0003ffff to register 1 <3>Read from Register 1: 0x0003ffff <3>write 0x0013ffff to register 1 <3>Read from Register 0: 0x00000800 <3>Read from Register 1: 0x0013ffff <3>Read from Register 2: 0x00620080 <3>Read from Register 6: 0x00000000 <3>Read from Register 7: 0x00025052 <3>Read from Register 8: 0x00200000 <3>Read from Register 9: 0x00200000 <3>Read from Register 10: 0x00000000 <3>Read from Register 11: 0x00000007 <3>Read from Register 12: 0x00030000 <3>Read from Register 13: 0x00019701 <3>Read from Register 20: 0x000000a4 <3>Read from Register 21: 0x00000000 <3>Read from Register 24: 0x00d55500 <3>Read from Register 26: 0x00000000 <3>Read from Register 27: 0x00000100 <3>write 0x00000040 to register 0 <3>write 0x0013ffbf to register 1 <3>write 0x00000200 to register 0 <3>write 0x0013fdbf to register 1 <3>write 0x00030000 to register 12 <3>write 0x00325052 to register 7 <3>write 0x00325052 to register 7 <3>write 0x00d55100 to register 24 <3>write 0x00d55100 to register 24 <3>write 0x00d55100 to register 24 <3>write 0x00d55100 to register 24 <3>write 0x00d55100 to register 24 <3>write 0x00d57100 to register 24 <3>write 0x00d57100 to register 24 <3>write 0x00d57100 to register 24 <3>write 0x00000004 to register 6 <3>write 0x00000004 to register 6 <3>write 0x00000084 to register 6 <3>write 0x00000084 to register 6 <3>write 0x0000008c to register 6 <3>write 0x0000208c to register 6 <3>write 0x000020ac to register 6 <3>write 0x000020ac to register 6 <3>write 0x00325052 to register 7 <3>write 0x00325052 to register 7 <3>write 0x00d57101 to register 24 <3>write 0x00d57103 to register 24 <3>write 0x00325052 to register 7 <3>Read from Register 2: 0x00620080 <3>write 0x000002a4 to register 20 <3>write 0x000002a4 to register 20 <3>write 0x000002b4 to register 20 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <7>pxa-spi pxa-spi: registered master spi1 <7>pxa-spi pxa-spi: registered child spi1.0 <4>ezx_pcap_probe entered <4>NetWinder Floating Point Emulator V0.97 (double precision) <6>Initializing Cryptographic API <6>io scheduler noop registered (default) <7>ezx_set_intensity to 25 <7>backlight last intensity was 0, new intensity is 25 <7>backlight power ON <4>EZX Backlight Driver Initialized. <4>pxa2xx-fb pxa2xx-fb: machine LCCR0 setting contains illegal bits: 00200878 <4>pxa2xx-fb pxa2xx-fb: machine LCCR3 setting contains illegal bits: 00300008 <4>Console: switching to colour frame buffer device 60x53 <6>SA1100 Real Time Clock driver v1.02 <6>usbcore: registered new driver usb ipc <6>drivers/char/ts0710_mux_usb.c: USB Host(Bulverde) IPC driver registered. <6>drivers/char/ts0710_mux_usb.c: 1.0alpha1:USB IPC Driver (TS07.10 lowlevel) <6>pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART <6>pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART <6>pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART <5>usbmon: debugfs is not available <6>pxa27x-ohci pxa27x-ohci: PXA27x OHCI <6>pxa27x-ohci pxa27x-ohci: new USB bus registered, assigned bus number 1 <6>pxa27x-ohci pxa27x-ohci: irq 3, io mem 0x4c000000 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 3 ports detected <6>usb 1-1: new low speed USB device using pxa27x-ohci and address 2 <3>usb 1-1: device descriptor read/64, error -110 <3>usb 1-1: device descriptor read/64, error -110 <6>usb 1-1: new low speed USB device using pxa27x-ohci and address 3 <3>usb 1-1: device descriptor read/64, error -110 <3>usb 1-1: device descriptor read/64, error -110 <6>usb 1-1: new low speed USB device using pxa27x-ohci and address 4 <3>usb 1-1: device not accepting address 4, error -110 <6>usb 1-1: new low speed USB device using pxa27x-ohci and address 5 <3>usb 1-1: device not accepting address 5, error -110 <6>usb 1-3: new full speed USB device using pxa27x-ohci and address 6 <3>usb 1-3: device descriptor read/all, error -110 <6>usb 1-3: new full speed USB device using pxa27x-ohci and address 7 <3>usb 1-3: device descriptor read/all, error -110 <6>usb 1-3: new full speed USB device using pxa27x-ohci and address 8 <3>usb 1-3: device descriptor read/8, error -110 <4>usb 1-3: config 1 has an invalid interface number: 13 but max is 2 <4>usb 1-3: config 1 has an invalid interface number: 6 but max is 2 <4>usb 1-3: config 1 has an invalid interface number: 7 but max is 2 <4>usb 1-3: config 1 has no interface number 0 <4>usb 1-3: config 1 has no interface number 1 <4>usb 1-3: config 1 has no interface number 2 <6>usb 1-3: configuration #1 chosen from 1 choice <4>usb_ipc_probe: completed probe! <6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported. <4>usb ipc: probe of 1-3:1.6 failed with error -1 <6>drivers/char/ts0710_mux_usb.c: usb_ipc_probe: Only two endpoints supported. <4>usb ipc: probe of 1-3:1.7 failed with error -1 <6>usbcore: registered new driver libusual <6>pxa27x_udc: version 21-Jul-2005 <5>USB cmd disconnect <3>Read from Register 2: 0x00620080 <6>usb0: Ethernet Gadget, version: May Day 2005 <6>usb0: using pxa27x_udc, OUT Bulk-out-2 IN Bulk-in-1 <6>usb0: MAC 9e:86:c5:c0:15:1a <5>USB cmd connect <3>write 0x000002b4 to register 20 <3>Read from Register 2: 0x00620080 <3>pxakbd: can't request irq 4 <4>pxa-keyboard: probe of pxa-keyboard failed with error -16 <3>write 0x00000000 to register 9 <3>write 0x00100000 to register 0 <3>write 0x00000002 to register 0 <3>write 0x0013fdbd to register 1 <3>write 0x0003fdbd to register 1 <3>write 0x00000000 to register 10 <3>write 0x00000000 to register 10 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x00000000 to register 9 <3>write 0x000a0000 to register 9 <6>input: EZX PCAP2 Touchscreen as /class/input/input0 <6>i2c /dev entries driver <6> : Enabling slave mode <3> : i2c_pxa_set_slave: wait timedout <6>I2C: i2c-0: PXA I2C adapter, slave address 1 <4>ezx_mci_init entered <4>ezx_mci_setpower(vdd=15) entered <3>Read from Register 7: 0x00325052 <3>write 0x00325072 to register 7 <6>Registered led device: e680:red <6>Registered led device: e680:green <4>ezx_mci_setpower(vdd=15) entered <3>Read from Register 7: 0x00325072 <3>write 0x00325072 to register 7 <6>Registered led device: e680:blue <6>Registered led device: e680:keypad <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 512 (order: -1, 2048 bytes) <4>TCP established hash table entries: 2048 (order: 1, 8192 bytes) <4>TCP bind hash table entries: 2048 (order: 1, 8192 bytes) <6>TCP: Hash tables configured (established 2048 bind 2048) <6>TCP reno registered <6>TCP bic registered <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <4>ezx_mci_get_ro entered <4>mmc_block: detected block size is 1024 bytes. Forcing 512 bytes <6>mmcblk0: mmc0:8b48 SD02G 1985024KiB <6> mmcblk0: p1 p2 <4>IP-Config: Complete: <4> device=usb0, addr=192.168.1.2, mask=255.255.255.0, gw=192.168.1.1, <4> host=ezx, domain=, nis-domain=(none), <4> bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath= <6>Waiting 5sec before mounting root device... <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS on mmcblk0p2, internal journal <6>EXT3-fs: recovery complete. <6>EXT3-fs: mounted filesystem with ordered data mode. <4>VFS: Mounted root (ext3 filesystem). <6>Freeing init memory: 92K <4>PXAMCI: stat 00000140 <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2009 bytes from ts0710_mux_usb inbuf. <4>Read 21 bytes. <4>Reading max 1988 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2009 bytes from ts0710_mux_usb inbuf. <4>Read 21 bytes. <4>Reading max 1988 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2009 bytes from ts0710_mux_usb inbuf. <4>Read 21 bytes. <4>Reading max 1988 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2009 bytes from ts0710_mux_usb inbuf. <4>Read 21 bytes. <4>Reading max 1988 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2009 bytes from ts0710_mux_usb inbuf. <4>Read 21 bytes. <4>Reading max 1988 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Read 11 bytes. <4>Reading max 2020 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 17 bytes. <4>Reading max 2031 bytes from ts0710_mux_usb inbuf. <4>Read 11 bytes. <4>Reading max 2020 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 7 bytes. <4>Reading max 2041 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 11 bytes. <4>Reading max 2037 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2016 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1984 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1952 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1920 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1888 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1856 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1824 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1792 bytes from ts0710_mux_usb inbuf. <4>Read 12 bytes. <4>Reading max 1780 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1748 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1716 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1684 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1652 bytes from ts0710_mux_usb inbuf. <4>Read 6 bytes. <4>Reading max 1646 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2016 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1984 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1952 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1920 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1888 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1856 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1824 bytes from ts0710_mux_usb inbuf. <4>Read 22 bytes. <4>Reading max 1802 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2016 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1984 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1952 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1920 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1888 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1856 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 1824 bytes from ts0710_mux_usb inbuf. <4>Read 30 bytes. <4>Reading max 1794 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>Read 32 bytes. <4>Reading max 2016 bytes from ts0710_mux_usb inbuf. <4>Read 2 bytes. <4>Reading max 2014 bytes from ts0710_mux_usb inbuf. <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. <4>nonzero read bulk status received: -104 <4>PXAMCI: stat 00000140 <4>PXAMCI: stat 00002140 <6>Bluetooth: Core ver 2.8 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: L2CAP ver 2.8 <6>Bluetooth: L2CAP socket layer initialized <6>Bluetooth: HIDP (Human Interface Emulation) ver 1.1 <6>Bluetooth: RFCOMM socket layer initialized <6>Bluetooth: RFCOMM TTY layer initialized <6>Bluetooth: RFCOMM ver 1.7 <4>PXAMCI: stat 00002140 <5>switching BT reset 0 <5>switching BT wakeup 0 <5>switching BT reset 1 <5>switching BT wakeup 1 <4>PXAMCI: stat 00000140 <4>PXAMCI: stat 00000140 <4>PXAMCI: stat 00000140 <6>udc: USB reset <6>udc: USB reset <6>udc: USB reset <6>usb0: full speed config #1: 100 mA, Ethernet Gadget, using CDC Ethernet Subset <4>PXAMCI: stat 00002140